Practice: Half-Spaces and Hyperplanes

Recognition · Direct application

A constraint reads 3 x 1 + 2 x 2 ≤ 12 . Where does the point ( 2 , 3 ) lie?

2 hints available, least help first.

Hint 1: Retrieval cue

Substitute the point into the left-hand side and compare the result with 12.

Hint 2: Concept cue

Decide what a closed inequality says about points where the two sides are equal.

Classification · Direct application · Explanation

For each constraint and point below, state whether the point satisfies the constraint, violates it, or lies on its bounding hyperplane. Show the value of the left-hand side in each case, and name the bounding hyperplane.

(a) 4 x 1 + x 2 ≤ 9 at the point ( 2 , 1 )

(b) x 1 − 3 x 2 ≥ 2 at the point ( 1 , 1 )

(c) 2 x 1 + 2 x 2 + x 3 ≤ 10 at the point ( 3 , 1 , 2 )

Write your answer, then compare it with the worked solution.

2 hints available, least help first.

Hint 1: Retrieval cue

For each part, compute the left-hand side at the given point before deciding anything.

Hint 2: Concept cue

The bounding hyperplane is what you get by replacing the inequality sign with an equals sign.

Compare with the worked solution

Comparing does not record a result. Judging your own written answer cannot show that you can do this without help.

(a) 4 ( 2 ) + 1 = 9 , exactly the right-hand side, so ( 2 , 1 ) lies on the bounding hyperplane 4 x 1 + x 2 = 9 . The inequality is closed, so the point satisfies the constraint.

(b) 1 − 3 ( 1 ) = − 2 , and − 2 ≥ 2 is false, so ( 1 , 1 ) violates the constraint. Its bounding hyperplane is x 1 − 3 x 2 = 2 .

(c) 2 ( 3 ) + 2 ( 1 ) + 2 = 10 , equal to the right-hand side, so the point lies on the hyperplane 2 x 1 + 2 x 2 + x 3 = 10 and satisfies the closed inequality. In three variables this hyperplane is a plane, not a line.

The bounding hyperplane. It is the equality case a T x = b . The set where the constraint holds exactly. The inequality divides the space into that boundary and the two sides of it, and naming the boundary is what makes "which side" a well-posed question.

A complete answer does each of these:

  • evaluates constraint
  • correct side
  • boundary included
  • names hyperplane

Error diagnosis · Explanation · Transfer

A student writes:

Each constraint of a linear program is a line, so with five constraints in four variables I can draw the five lines and read off the feasible region. A point exactly on a line is not in the region, because the region is what the lines enclose.

There are two separate errors here. Identify both, correct each one, and state what the constraint x 1 + x 2 + x 3 + x 4 ≤ 7 actually describes in R 4 .

Write your answer, then compare it with the worked solution.

2 hints available, least help first.

Hint 1: Retrieval cue

How many dimensions does one linear equation remove from the space it is written in?

Hint 2: Concept cue

Consider separately what the student says about shape and what they say about points lying exactly on a boundary.

Compare with the worked solution

Comparing does not record a result. Judging your own written answer cannot show that you can do this without help.

First error: the dimension. A single linear equation in n variables describes a flat of dimension n − 1 , not a line. A line is what that happens to be when n = 2 . In four variables the equation x 1 + x 2 + x 3 + x 4 = 7 describes a three-dimensional hyperplane, and the constraint x 1 + x 2 + x 3 + x 4 ≤ 7 describes the closed half-space on one side of it. Neither can be drawn, and the plan to read the region off a sketch does not survive past two variables.

Second error: the boundary. A closed inequality includes the points where the two sides are equal, so a point on the bounding hyperplane is in the feasible region rather than excluded from it. This matters beyond bookkeeping: optima in linear programming characteristically lie on constraint boundaries, so a rule that discards them discards the answers.

What survives the move to higher dimensions is the arithmetic. To test a point, evaluate the left-hand side and compare it with the right; the procedure is identical in two variables and in four hundred.

Naming the boundary. The bounding hyperplane of a T x ≤ b is a T x = b . A point there satisfies a closed inequality; it is on the boundary of the half-space, not outside it, which is the distinction the error above turns on.

A complete answer does each of these:

  • evaluates constraint
  • correct side
  • boundary included
  • names hyperplane
Practice data

Your practice record is stored in this browser only. Clearing it removes every answer and every scheduled review, and cannot be undone.

Results update as you type. Use the up and down arrow keys to move between results, Enter to open one, and Escape to close.

Type to search.

Settings

Appearance

Interface density

Your record

Your progress is stored in this browser and nowhere else: an identifier, the answers you have given, the mastery states and review schedule derived from them, and the lesson you last opened. Clearing it makes you a new learner on this device. It cannot be undone, and it will not affect your appearance or density settings.

Focus timer

Focus--minutes remaining

Phase

Kept in this browser only, and used to label the session in your own history.

Today

Nothing recorded yet. Finish a focus session and it will appear here.

Settings

Focus sessions between long breaks.

Sessions you are aiming for in a day.

Notifications

Your history

Sessions are stored in this browser and nowhere else. They are not evidence and never reach your mastery record.